Filter
Top Products
English
29
System Menu Options
Subwoofer
Selects ON/OFF for the subwoofer.
Test Tone
The test tone will be automatically generated.
Note:
– This option is available only when you select
"5.1CH" under "Downmix" and the disc tray is
open.
Dialog
Adjusts the dialog level up or down so that you
can hear the dialog more clearly during playback.
SPDIF Output
The options included in SPDIF (Sony/Phillips
Digital Interface Format) Setup Page are: “SPDIF
Off”, “SPDIF/Raw” and “SPDIF/PCM”.
➜ SPDIF Off: Tur ns off the SPDIF output.
➜ SPDIF/Raw: If you have connected your
DIGITAL OUT (COAXIAL or OPTICAL) to a
multi-channel decoder/receiver.
➜ SPDIF/PCM: Only if your receiver is not
capable of decoding multi-channel audio.
Dolby Digital Setup
The option included in Digital Audio Setup is:
“Dual Mono”.
Dual Mono
Select the setting that matches the number of
speakers you have connected.
➜ Stereo: Left mono sound will send output
signals to Left speaker and Right mono sound
will send output signals to Right speaker.
➜ L-Mono: Left mono sound will send output
signals to Left speaker and Right speaker.
➜ R-Mono: Right mono sound will send output
signals to Left speaker and Right speaker.
3D Processing
The options included in 3D Processing are: “Pro
Logic II” and “Reverb Mode”.
Pro Logic II
The options included in Pro Logic II Config page
are: "Pro Logic II", "Mode", "Panorama",
"Dimension" and "Center Width".
Pro Logic II
This function provides a convincing three-
dimensional sound field on conventional stereo
music recordings.
➜ On: Tu rns on the Pro Logic II effect.
➜ Off: Tu r ns off the Pro Logic II effect. In this
case, all options below "Pro Logic II" will be
unavailable.
pg 001-039_MCD715_93_Eng 2007.8.29, 9:3329