Philips MCS 130 LCR CRT Television User Manual


 
22
B
®
®
®
®
hb q
0
i
0
879
546
2
Ì
Q
U
®
v
S
bæ
MENU
+
-
V
¬
+
-
P
13
LCD
RADIO
Select
VCR DVD SAT AMP CD
OK
Active Control
Ò‡π
Most of the audio and video equipment from the Philips range of products
can be operated with the remote control of your TV.
Press the
Select key to operate any of the equipment indicated in the
display.Another device can be selected by pressing
Select repeatedly within
2 seconds.The led will blink slowly to indicate the device.
Press one of the keys on the remote control to operate the peripheral
equipment.
To r eturn to TV mode press
Select while the led is blinking.
When no action is taken within 60 seconds, the remote goes back to TV
mode.
Note:When the
Select key is pressed and hold for more than 2 seconds, the
RC5/RC6 system select command is transmitted.
B to switch to standby
S for pause (
VCR, DVD, CD)
® for record,
Ò for rewind (
VCR, CD);
search down (
DVD, AMP)
for stop
π for play
for fast forward (
VCR, CD);
search up (
DVD/AMP)
æ to select your choice of
subtitle language (
DVD);
RDS news/TA (
AMP);
to shuffle play (
CD)
b to select a
DVD title;
RDS display (
AMP);
info on screen (
CD)
i display information
MENU to switch the menu on or
off
- P + for chapter, channel, track
selection
0 to 9 digit entry
0 tape index (
VCR),
select a DVD chapter,
select a frequency (
AMP)
U VCR timer
Q surround on/off (
AMP, CD)
cursor up/down
to select the next or the
previous disc (
CD)
cursor left/right
to select the previous or
following track (
CD)
search up/down (
AMP)
& The remote control should be in TV mode.
é Press the OK key together with
• digit 1:
DVD mode is selected
• digit 2:
DVD+RW mode is selected
• digit 3:
SAT (RC5) mode is selected
• digit 4:
SAT (RC6) mode is selected
• digit 5:
CD mode is selected
• digit 6:
CD-R mode is selected.
In TV mode, it is possible to start a direct recording of the programme
which is being displayed on the TV screen.
Continue to press the ® record key on the remote control for more than
2 seconds.
Note:
Switching programme numbers on your TV does not disturb recording !
When recording a programme from a peripheral connected to
EXT.1, 3, 4 or
SIDE you can not select another TV programme on the screen.
Selecting submodes for DVD+RW,SAT, CDR
Audio- and Video equipment keys
Record with your recorder with EasyLink
2229.1 gb 12-03-2003 09:55 Pagina 22