Philips PDCC-JH-0811 DVD Player User Manual


 
English
32
Radio Reception
Tuning to radio stations
1 Press SOURCE on the set (or FM on the
remote control ) repeatedly until FM is displayed.
2 Press down on TUNING à / á (or à / á
on the remote control) and release the button.
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
3 Repeat step 2 if necessary until you find the
desired station.
To tune to a weak station, press TUNING à /
á (or à / á on the remote control) briefly
and repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be erased.
In tuner mode, press and hold PROG until
“AUTO” appears on the display panel.
All previously stored radio stations will be
replaced.
Manual programming
1 Tune to your desired station (see Tuning to radio
stations).
2 Press PROG on the remote control to activate
programming.
PROG flashes in the display.
3 Press í/
ë to allocate a number from 1 to 20
to this station.
4 Press PROG on the remote control again to
confirm the setting.
PROG disappears. The preset number and the
frequency of the preset station are shown.
5 Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
Press í/
ë until the desired preset station is
displayed.
7
D
pg021-040_MCD177_79_Eng 3/13/08, 10:5332