Filter
Top Products
20
Tips
PC and PIP modes
don’t work?
Standby
• Check that you have configured the computer on a compatible display
resolution (refer to page 15).
• If the set receives no signal for 15 minutes, it automatically goes into
standby mode. To save power, your set is fitted with components that
give it a very low power consumption when in standby mode (less than 1 W).
• Only use a clean, soft and lint-free cloth to clean the screen and the
casing of your set. Do not use alcohol-based or solvent-based products.
• Disconnect the mains plug of the TV for 30 seconds then reconnect it.
• If your TV set breaks down, never attempt to repair it yourself: contact
your dealer’s after-sales service.
26PF5320 32PF5320 32PF7320
Visible screen size 660 mm 800 mm 800 mm
Audio Output : 2 x 5 W RMS 2 x 15 W 2 x 15 W
TV System NTSC M (3.58 – 4.5)
NTSC (4.43 – 5.5)
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM K1
Playback System NTSC 3.58, NTSC 4.43, PAL 60
Set Dimensions with stand:
Width 804.5 mm 924 mm 924 mm
Depth 222 mm 222 mm 222 mm
Height 477 mm 550 mm 550 mm
Net Weight of set with 16 kg 18.2 kg 18.2 kg
stand (approximate )
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the
type number at the rear of the set.
Specifications
Cleaning the set
Still no results?