Filter
Top Products
10
Switch on for the first time
The first time the TV set is switched on, a
congratulation message will appear on screen.
The language of which changes every 5 seconds.
If the message is not displayed, press and hold
down the
MENU key on the side of the TV set
for 5 seconds to display the message.
& Press the
key on the remote control, the
moment your prefered language is visible
on the screen.The Setup menu is displayed :
é The Language, corresponding Country
and
Time Zone is now preselected according
to the selected language. However, you can still
change your preferences before you start a
service scan.
English
Español
Français
Italiano
Suomi
Language
Country
Time Z
one
Service Scan
Setup
11:46
Set options and start a service scan
“ With the cursor keys, select Language,
Country or Time Zone and check if the
adjustment is according to your preferences.
If necessary, use the cursor keys to make
your adjustment and press
key to exit.
CAUTION : if you select a wrong country, the
channel numbering will not be according to the
standard for your country and you may not receive
all services or nothing at all.
‘ Select Service Scan from the menu and
press
key to start the installation. The
service scan menu is displayed. All the digital
and analogue programmes are searched for
and stored automatically. When the search is
complete, the menu will indicate the number
of digital services and analogue programmes
found.
( Press the key twice to start watching TV.
The television then displays the current
program. The installation is now complete.
NOTE : If at some point of time you decide
to reset to the factory default settings, press
and hold down the
MENU key on the side
of the TV set for 5 seconds. A congratulation
message will appear on screen. Repeat steps
1 - 5 as if this was the first time you have
turned on the TV.
This activity will reset both
the Digital and
Analogue mode to
factory default settings.