Philips 32PF5521D Flat Panel Television User Manual


 
5
Remote Control keys
Standby
To set the TV to standby mode. To switch
the TV set on again, press , to
or the + P(age) – key.
Mode selecto
r
To activate the remote control in TV, DVD
or AUX mode (see page 6).
Cancel
In digital mode, it functions as an exit key for
MHEG teletext when no coloured
key links
are available to exit teletext mode.
TV menu
To display or edit from the analogue menus.
Cursor
These 4 keys are used to move within
the menu or to directly access the screen
formats.
Analogue or Digital mode
To switch the television between analogue
and digital mode.
Volume + / –
To adjust the sound level.
Mute
To disable or enable the sound.
Numerical keys
For direct access to programmes. For a 2
(3) digit programme number, the second
(third) digit must be entered before the dash
disappears. The number, the name (and the
sound mode, in analogue mode) are displayed
for a few seconds.
Screen information
In digital mode, press the key once to
display the information banner and the
second time to exit information banner
(see page 11).
In analogue mode, display/remove the
programme number, the sound mode, the
remaining time of the sleeptimer and the
*signal strength indicator.
Teletext / Sound mode
In teletext mode, it functions as a teletext
key (see pages 27-28).
In TV mode, it is used to force programmes
in Stereo and Nicam Stereo to Mono or,
for bilingual programmes, to choose between
Dualåor Dual». The Mono indication is red
when in forced position
.
Subtitle mode
In digital mode, it activates or deactivates
the subtitle mode.
1
2
3
4
5
6
7
8
9
10
11
12
* The signal strength indicator shows
the signal strength of the transmission
of the programme you are watching.
1
2
4
5
6
7
8
9
10
3
11
12
13
14
15
16
17
18
19
20
21
22
24
23
25
26
27