Filter
Top Products
20
Automatic tuning of analogue programmes
This menu allows you to automatically search
for all the analogue programmes available in your
region.
Before you automatically search for all the
analogue programmes, ensure the TV is in
analogue mode. If it is in digital mode, press
the
A/D
(Analogue / Digital) key to enter the
analogue mode.
& From the analogue mode, press the key.
é Using the ï key, select Install and the
Æ
/
OK
key to enter the Install
menu.
“ Using the ï key, select Auto Store and
the
Æ /
OK
key to start automatic
searching of the channels. All the
available
TV programmes will be stored. This
operation takes a few minutes. The display
shows the progress of the search and the
number of programmes found.
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Auto Store
Manual Store
Sort
Name
Start
Æ
Æ
Æ
Æ
Æ
Program Sort
& Press the
key. The TV Menu is
displayed on the screen.
é Use the ï key, select the Install menu
and the
Æ /
OK
key to enter the
Install
menu.
“ Use the ï key to select Sort and the
Æ
/
OK
key to enter sort mode.
‘ Select the programme number you want to
move
using the Î ï keys and the Æ /
OK
key to enter sorting mode (The arrow
cursor now points to the left).
( Use the Î ï keys to select the new
programme number and confirm with the
Í /
OK
key. (The arrow points to the right
and sorting is completed
).
§ Repeat steps ‘ and ( for each
programme number you wish to re-number.
è To return to previous menu, press the
key.
8
To exit the menu, press the
key.
TV Menu
Picture
Sound
Features
Install
Install
Language
Country
Auto Store
Manual Store
Sort
Name
Æ • 0
Æ • 1
Æ • 2
Æ • 3
Æ • 4
Æ • 5
Important : To exit or interrupt the search
before it is completed, press th
e
TV
MENU
key.
If you interrupt search during auto store, not
all channels will be stored. For all channels to
be stored, you need to do a complete auto
store search again.
NOTE
ATS (Automatic Tuning System)
feature
If the transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. In this case, the installation
is complete.
If this is not the case, you need to
use the
Sort menu to number the programmes
correctly.
ACI (Automatic Channel Installation) feature
If a cable system or a TV channel which
broadcasts ACI is detected, a programme list
appears. Without ACI broadcast, the channels
are numbered according to your language and
country selection. You can use the Sort menu to
renumber them.
You cannot
select Language or Country
in Analogue mode. If you want to select
Language or Country, you have to exit
Analogue mode and enter into Digital mode
to do so (refer to “Language and location
preferences” on page 13).