Filter
Top Products
PLW225S & PRF227S DFU # 3135-125-20871 PRELIMINARY 04/15/02
3
INTRODUCTION
Philips Institutional TV Software
Your Philips Institutional Television can be configured to operate in either "Consumer" or "Commercial" operational
modes.
Commercial Mode: Your Philips Institutional Television is configured at the Factory to operate in Commercial mode.
When the television is in Commercial mode, access to its operation from its front panel controls or from a guest-mode
remote can be limited, depending upon the settings of the Institutional TV features. For examples, the unit’s front panel
controls can be “locked-out” (rendered inoperable), only certain channels can be selected, and/or the volume can be lim-
ited to a given range.
Consumer Mode: When in the Consumer mode, the unit operates as a standard TV, bypassing the Institutional
Television feature set, thus allowing normal initial power ON, channel selection, and volume control (as well as a vari-
ety of selectable Menu features). When the TV is in Consumer mode, Philips RC-5 system 0 (guest-mode) remotes, such
as the RC2524BK and the RL9820BK (optional accessories) can access the Consumer-mode Main Menu, and configure
the television to the full extent offered in this mode. Guest-mode 21-button remotes such as the RC2524BK use the Menu
button to access the Consumer menu. Guest-mode 20-button remotes such as the RL9820BK, which do not have a Menu
button, use the Sleep button to access the Consumer menu. Simultaneously pressing the front panel’s Volume - and
Volume + buttons also invokes the Consumer menu.
Identifying the Operational Mode: To identify the television’s operational mode, a system 7 (commercial setup mode)
master setup remote (RG4172BK, optional accessory) must be used. With the RG4172BK in setup mode (press TV
SETUP on the RG4172BK), press Recall. The following information will appear on-screen:
Changing Operational Modes: To change the television’s mode between Consumer and Commercial modes, a system
7 (commercial setup mode) master setup remote must be used. With the RG4172BK in setup mode (press TV SETUP on
the RG4172BK), enter the following keystroke sequence: 0 2 4 9 9 5 Menu. Only the RG4172BK, when it is in setup
mode can change the television’s mode between Consumer and Commercial, and provide complete access to the televi-
sion’s Institutional Features. The RG4172BK can be set to operate in either its master setup remote mode, or in guest-
mode. The RG4172BK’s guest mode facilitates testing the desired Institutional / Commercial configuration.
STATUS ITEM STATUS DATA MEANING
SYSTEM STATUS (LO1ITV-US4PV)
n/a
Information title
MODE COMMERCIAL / CONSUMER
Operational mode
CHANNEL CHANNEL, INPUT (CHANNEL, INPUT)
Currently-tuned channel
DCM OFF / ON
Data communications module offline /
online
CODES 211 222 001 035
Internal data for factory / service use.
SIGNAL TUNED / NOT TUNED
Signal present / absent
OP HRS 0031h
Number of cumulative hours unit has
been operated (hexadecimal)
ERRORS 0 0 0 0 0
Internal data for factory / service use.
VERSION 3.3
Television software version.