Filter
Top Products
• If the device does not respond at all,or not to all of the key
commands, follow the instructions under ‘Setting the remote
control’.It is possible that you must enter another code for the
device.
4. Extra possibilities
Adjusting device selection (Mode selector)
The SRU 5060 is default set for operating TV,VCR, CD,DVD,STB (settop
box,satellite or cable decoder) and AMP (amplifier).You can select the device
you wish to operate with the SELECT key (mode selector). Each option
allows operation of one device only. If desired, you can program the SELECT
key (mode selector) to select a different kind of device. For example, if you
want to operate a second TV. In the following example you will see how to
configure the DVD key for a second TV.
1 Switch on the second TV.
2 Press the SELECT key to select STB.
Press the key until STB lights up in the
selector window.
3 Then keep keys 1 and 6 on the SRU 5060
pressed simultaneously for three seconds,
until STB in the selector window lights up.
4 Press keys 9, 9 and 2 in that order.
5 Press the SELECT key to select TV.
Press the key until the light around the
Standby key lights up.
6 Press the 1 key.
– STB in the selector window flashes twice.
STB will now allow you to operate your
second TV.
7 Program the SRU 5060 to operate the
second TV.
See ‘Setting the remote control’.
8
Instructions for use
English