Philips SWW1810 Cable Box User Manual


 
14
6 Align the adhesive tape on the receiver
with the one on the HDTV until both the
receiver and HDTV are mounted together
rmly.
Note
The use of adhesive tapes is an alternative mounting
option when the receiver cannot be xed.
When you mount the receiver at the back of the
HDTV, avoid blocking the ventilation holes of the
HDTV.
For safety reason, check regularly if the HDTV and
receiver are mounted together rmly.
The receiver is not recommended for in-the-wall
installation.
Mount your receiver on the
back of the HDTV
1
Remove the white protective lm from
one of the supplied adhesive tapes.
2 Secure the glued side of the adhesive tape
and attach it to the central bottom area of
the receiver.
3 Select a at location on the rear side of
the HDTV.
4 Remove the white protective lm from the
other adhesive tape.
5 Secure the glued side of the adhesive tape
and attach it to the selected rear side of
the HDTV.
EN