Filter
Top Products
9
English
2 Connect the supplied power adapter to
the transmitter.
• Connect one end of the power
adapter to the DC IN jack of the
transmitter.
• Connect the other end of the power
adapter to a power outlet.
» The power button of the transmitter
is lit in solid blue and turns red in
standby mode.
Connect the receiver to the
HDTV set
DC 5V
HDMI OUT
IR IN
1
2
HDMI IN
1 Connect the receiver with an additional
HDMI cable (not supplied):
• Connect one end of the HDMI cable
to the receiver.
• Connect the other end to the HDMI
IN connector of your HDTV.
2 Connect the supplied power adapter to
the receiver:
• Connect one end of the power
adapter to the DC IN jack of the
receiver.
• Connect the other end of the power
adapter to a power outlet.
» The power button of the receiver is lit
in solid blue and turns red in standby
mode.
4 Installation
Connect the transmitter to
your HD devices
You can connect two audio/video sources to
the transmitter at the same time, but only one
source can be selected and played.
1 Connect the audio/video source to the
transmitter using the supplied HDMI cable.
• Connect one end of the HDMI cable
to the HDMI IN connector of the
transmitter.
Note
•
There are two HDMI IN ports but only one HDMI
cable is supplied. To connect two audio/video sources
to the transmitter at the same time, you need an
additional HDMI cable.
• Connect the other end of the HDMI
cable to the HDMI OUT connector of
the video source.
EN