Philips TP2785CI CRT Television User Manual


 
The S(uper)-Video connection on
the rear of the television can give
you better picture detail and clar-
ity, for the playback of S-VHS
VCR tapes, or Digital Video Discs
than the normal antenna picture
connections.
Note: The accessory device being
used must have a S-Video Output
to complete this connection. The
following steps show the connec-
tions to the S-VIDEO and
AUDIO IN 1 input jacks,
Connect the S-VIDEO
CABLE to the S-VIDEO input
jack on the rear of the television,
then the AUDIO (red and white)
to the AUDIO AV1 (l[rft and right)
jacks on the rear of the TV.
<,_ Connect the S-VIDEO
CABLE to the S-VIDEO output
jack on the accessory device•
Then connect the red and white
AUDIO CABLES to the AUDIO
deft and right) output jacks on the
rear of the accessory device.
<,_ Turn the VCR
(or
Digital
I Video Disc Player) ON.
_._ Press the MENU button
on
the remote to display the onscreen
menu.
_1 ,_ Press the CURSOR UP
or
CURSOR DOWN buttons
until the word INPUT is highlight-
ed.
Press the CURSOR RIGHT
or CURSOR LEFt
button to display the INPUT menu
(ANTENNA, EXT 1, EXT 2). Use
the CURSOR UP or DOWN
buttons to select EXT 1.
Now your ready to use the accesso-
ry device with the S-Video outputs.
O
NOTE: If thereis an accessory device plugged into
[the S-VIDEOjack and one pluggedinto the VIDEO
IN-I jack. the video signal coming from theS-VIDEO
plug will be dominate when tuned to EXT 1within
the INPUT control.
__J
BACK OF TV
S-VIDEO CABLE
(NOT SUPPLIED)
AUDIO IN
(RED/WHITE)
RACK OF ACCESSORY
SAP ON
AVL ON
IINPUT I_1
SLEEPTIMER OFF
SmartLock
DBS, DVD, Video Game, etc.
AUDIO OU'FPUT JACKS)
-®®®
"®®®
o®®
_w
o
ANTENNA
IEXT1 I
D(T2
" 26