Filter
Top Products
L2
_ DIP hookup a a
with VCR and
1Digital Video Disc Player (or
similar device_
First connect the original cable
TV signal or Antenna signal to the
ANT IN jack on the back of the
VCR.
_ Connect the ANT OUT jack on
the rear of the VCR to the ANT IN
jack on the rear of the Video Disc
Player.
<_ Connect the ANT OUT jack on
the rear of the Video Disc Player to
the 75_ input on the rear of the TV.
_ Connect the yellow Video Cable
from the VIDEO OUT jmckon the
VCR to the VIDEO AV1 jack on the
TV. Then, connect the red and white
Audio Cables from the AUDIO OUT
acks on the VCR to the AUDIO AV1
acks on the rear of the TV (labeled
kUDIO L & R AV1).
<_ Connect the Video Cable
yellow
from the VIDEO OUT jack on the
Video Disc Hayer to the VIDEO
AV2 jack on the TV. Then, connect
the red and white Audio Cables from
the AUDIO OUT jacks on the VCR
to the AUDIO AV2jacks on the rear
of the TV (labeled AUDIO L & R
AV2).
Note: When selecting the PIP
SOURCE, the VCR will appear on
the EXT 1 channel, and the Video
Disc Player will appear on the EXT
2 channel.
O
REAR OFTV
I
VIDEO
CABLE
(YELLOW)
75 OHM COAXIAL CABLE
OUTSIDE UHF/VHF ,_/_ . /
ANTENNA OR
CABLE "IV SIGNAL
42