Filter
Top Products
20
[3] ACTIVATE TO TURN ON SmartLock
TM
V-CHIP BLOCK
1 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” mark to
“STATUS”, then press
VOL (+)
or
(–)
to activate the SmartLock
TM
V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be
operated.)
2 Press
MENU
, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
.
4 Press
MENU
and SECRET No. is registered.
L To cancel the SmartLock
TM
V-CHIP BLOCK screen while SmartLock
TM
V-CHIP BLOCK
has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data the same as you configured.
NOTE:
•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2 Press
MENU
, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
, then
SmartLock
TM
V-CHIP BLOCK will temporarily be canceled. If the
wrong SECRET No. is chosen, “SECRET No. IS INCORRECT”
will be displayed. Input the SECRET No. again in this case.
→
Parent Control (SmartLock
TM
V-CHIP Operation Continued)
NOTE:
• If you change Power from OFF to ON, then SmartLock
TM
V-CHIP BLOCK will be activated ON again.
19-25 TP3675C 6/9/00, 9:35 AM20