Philips TP3684C1 CRT Television User Manual


 
42
ANTENNA
OUT
IN
OUT
IN
AUDIO
R
L
VIDEO
IN
OUT
OR
ANT "A"
75
L
AUDIO
R/MONO
IN-1 IN-2 OUT
VIDEO
S-VIDEO
1
USING THE PIP (PICTURE-IN-PICTURE) FEATURE
P
icture in Picture (PIP) is the
showing of two pictures on
the screen at the same time (one
main screen picture and a small-
er inset picture, or PIP).
Note: The PIP picture must be
supplied by a VCR (or other
accessory device equipped with a
VIDEO OUTPUT jack).
The following is a basic PIP
hookup using a VCR to supply
the secondary picture.
Connect the VIDEO OUT
jack on the VCR to the VIDEO
IN (yellow) jack on the rear of
the TV.
Also connect the AUDIO OUT
(Right and Left) jacks from the
VCR to the AUDIO IN jacks (red
and white) on the TV.
Also be sure that there is a nor-
mal Cable or Antenna signal con-
nection between the VCR and the
TV.
This completes the basic PIP
hookup. Refer to pages 46-47 for
“More PIP Connections.”
Move to the next page after
the VCR to TV PIP connections
have been completed.
SMART HELP
Remember, for other pos-
sible connections see pages
46-47 for the “More PIP
Connections” section.
If you have a single (Monaural)
Audio Output VCR, there are two
methods of connection. Use only
the Right Audio IN (RED) and
leave the Left Audio IN with NO
connection. Or, “Y” connectors are
available to complete your connec-
tion. Contact your dealer, or our
Parts Information Center,
1-800-851-8885, for details.
BEGIN
PIP CONNECTION
MAIN SCREEN PICTURE PIP INSET PICTURE
BACK OF TV
AUDIO OUT
FROM VCR
TO AUDIO IN
ON TV
(RED AND WHITE)
VIDEO
OUT
(YELLOW)
ANT OUT
OUTDOOR
UHF/VHF
ANTENNA
CABLE TV
SIGNAL
VCR
(OR SIMILAR DEVICE)