Filter
Top Products
12
EN
How to change a programmed
recording (TIMER)
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TIMER' with or .
Then press .
4.
4.Select 'ONCE', 'DAILY' or 'WEEKLY' record-
ing with or .Then press
.
5.
5.
Select a TIMER block with .(The flashing
number indicates an empty TIMER block.)
6.
6.Press to delete information and input
correct information with .
7.
7.To end, press
.
8.
8.Switch off with
.
Problems and solutions for
programmed recordings
STANDBY/ON
yy
STATUS/EXIT
0..9
CLEAR
0..9
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
Error message: ' ' flashes in the video recorder
display
•
No cassette was inserted. Insert a cassette and
switch off the video recorder using .
Cassette was ejected as soon as the
button was pressed
• A cassette without the security tab was inserted.
Undo the erase protection (chapter 'Manual record-
ing', section 'Preventing accidental erasing') or
insert a different cassette.
'TURN OFF VCR FOR TIMER RECORDING' flash-
es on the TV screen
• The video recorder is switched on several minutes
before the start of a programmed recording. Switch
off the video recorder with . A pro-
grammed recording (timer) will only function when
the video recorder is switched off.
Cassette is ejected during recording
• The end of the tape was reached during recording.
The video recorder does not react
• While a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press
on the front panel.
STOP/EJECT
STANDBY/ON
yy
STANDBY/ON
yy
STANDBY/ON
yy
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
HG271BD(EN).qx3 04.1.23 8:25 PM Page 12