Philips VR388-55 VCR User Manual


 
— 21 —
Correction
Insert the cassette with the window side up and the record
tab facing you.
Check that a cassette tape is not already inserted. Press
EJECT 0.
Check that the AC power cord is correctly connected to
an AC outlet.
If the
(Timer) indicator is lit on the display, press
POWER to cancel timer recording, then press EJECT
0.
Check that the record tab on the back of the cassette is
not removed. (P.14)
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/OTR , or when
you press POWER to set timer recording.
General
Mains voltage AC 110 – 240V
Mains frequency 50/60Hz
Power consumption Approx. 18 watts
Ambient temperature +5°C to +40°C
Relative humidity 10% to 80%
Dimensions Approx. 400(W) x 94(H) x 272(D) mm
Mass Approx. 3.1kg
Position for use Horizontal
Video output channel UHF E36 (adjustable between E28 — E60)
Possible number of TV channel 99
Number of pre-programmable memory blocks 8
Number of days in advance 365 or every day, or every week
Tuner
Aerial input B/G, D/K, I, SECAM K1
VHF L: 42 — 175 MHz
VHF H: 175 — 470 MHz
UHF: 470 — 870 MHz
CATV
Video
Input (VIDEO IN) 0.5 to 2.0 Vp-p, 75 ohms
Output (VIDEO OUT) 1.0±0.2 Vp-p, 75 ohms
Resolution Better than 240 lines
Signal/noise ratio Better than 43 dB
Audio
Input (AUDIO IN) –8 dBs, 50k ohms (0dBs=0.775 Vrms) – for RCA connector
–8 dBs, 10k ohms (0dBs=0.775 Vrms) – for SCART connector
Output (AUDIO OUT) –6 dBs, 1k ohms (0dBs=0.775 Vrms)
Accessories supplied Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA (only for checking operations)
SCART cable – RCA type (for VR388/55 only)
S
PECIFICATIONS
Design and specifications are subject to change without notice.
VR388/588-55 EN (N) 6/1/99, 9:05 AM21