Filter
Top Products
— 7 —
20 STOP 7 /
∞∞
∞∞
∞ button
• Stops the tape. (✈P.14)
• Moves down the cursor when using
the menus. (✈P. 11 )
21 CH (channel) 5 / ∞ button
Before using this button, press VCR or
TV.
• After pressing VCR, changes the
channels on the VCR. Release at a
desired channel.
For some Philips TV only:
• After pressing TV, changes the
channels on the TV. Release at a
desired channel.
22 VOL (volume)
55
55
5 /
∞∞
∞∞
∞ buttons
For some Philips TV only:
Changes the TV volume.
Release at desired volume.
23 CLEAR button
Erases unwanted timer programmes.
(✈P.18)
24 AUDIO/MUTE button
For some Philips TV only:
Turns off the TV sound.
To insert the batteries:
1 Remove the battery compartment lid
from the bottom of the remote
control.
2 Install two batteries —R6(SUM-
3)/AA — matching polarity
indicated inside the battery
compartment.
3 Replace the lid.
CAUTION
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
Note:
This remote control and batteries are
supplied accessories.
Check to make sure they are included.
Also, check “Specifications” to see what
other accessories are included.
1 AC (alternating current)
power cord
Connect the AC power cord to an AC
outlet.
Rear Panel
3 AV1 IN/OUT terminal
(SCART)
For connecting to the SCART terminal
(21-pin SCART connector) on TV or
another VCR. (✈P.9. P.19.)
4 RF OUT (output) terminal (to
TV)
Use the supplied RF coaxial cable to
connect this terminal on the TV. (✈P.9)
2 ANT. (antenna) IN (input)
terminal (from Antenna)
Connect your antenna or Cable to this
terminal. (✈P.9)
ANTENNE
SORTIE
RF. OUT
ENTREE
ANT.IN
002
AV1
ENTREE/SORTIE
IN/OUT
12
4
3
VR388/588-55 EN (N) 6/1/99, 9:01 AM7