ONE TIME PROGRAM
PROGRAM 1
CHANNEL 9
TIME ON 10:30 PM
TIME OFF 11:30 PM
REC SPEED SLP
SP=1 LP=2 SLP=3
START DATE 10/10/97
FRI.
TO END PUSH EXIT
Timer Recording With the VCR Plus+ Programming System (cont’d) 37
• To quit the VCR Plus+ program-
ming system at any time, press the
STATUS/EXIT button. The display
will disappear from the TV screen.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.
• To stop a started timer recording,
press the STOP/EJECT button on
the VCR.
• If the power fails for more than one
minute, programmed timer record-
ings may be lost. Reset the clock
before re-programming the timer
recordings.
• If you have a Cable Box, timer
recordings are programmed differ-
ently. See page eight for details.
See page 48 for more notes.
Helpful Hints
4
Press the Number 1 button to record in SP speed, press
the Number 2 button to record in LP speed, or press the
Number 3 button to record in SLP speed. For details, see
pages 32 and 50.
You cannot use the (Tape) SPEED button at this time. Your choice
will appear to the right of REC SPEED (but SP=1, LP=2, and SLP=3
will continue to flash).
The VCR must be off for a
timer recording to take
place! Make sure there is a
tape in the VCR.
5
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. After three seconds, the on-screen
display will disappear.
6
Press the POWER button to turn off the VCR power. The
Timer light will appear. The Timer light will flash if there is not a
tape in the VCR.
If the timer recording will take place several hours or days from
now, you may use the VCR until time for the recording. Just turn
off the VCR a few minutes before the recording starts.
The VCR must be turned off for a timer recording to take
place. If you forget to turn off the VCR, PLEASE TURN OFF
VCR FOR TIMER RECORDING flashes on your TV screen two
minutes before a timer recording starts. You can remove the mes-
sage by pressing the CLEAR button.
4
5
6
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
SLOW
PAUSE/STILL
MENU
CLEAR
EJECT
STOP
F.FWD
– +
1
2 3
4
5 6
7
8 9
0
+100