Philips VRZ262AT VCR User Manual


 
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CBL/DBS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY
SLOW
PAUSE/STILL
MENU
CLEAR
EJECT
STOP
F.FWD
1
2 3
4
5 6
7
8 9
0
+100
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
Recording 27
2
Insert a tape with its record tab intact in the VCR.
4
If the VCR light appears on the display panel, go to step 5. If the
VCR light does not appear, press the VCR/TV button
once.
• If you press the REC(ord)/OTR but-
ton when there is not a tape in the
VCR, NO CASSETTE will flash on-
screen.
• If you press the REC(ord)/OTR but-
ton while a tape without a record
tab is in the VCR, the VCR will eject
the tape and PROTECTED CAS-
SETTE CANNOT RECORD will flash
on-screen.
• Other recording options are on
pages 28 - 38.
• You can change the tape speed
during a recording, but some distor-
tion will appear on the tape.
• The VCR will record in a preset vol-
ume.
Helpful Hints
5
Press the SPEED button until the desired tape speed appears
briefly on-screen. (Details about tape speed are on page 32.)
6
Use the CHANNEL o/p buttons or the Number buttons
to select the channel to be recorded.
7
Press the REC(ord)/OTR button once to start recording.
The REC light will appear.
8
To pause the recording, press the PAUSE/STILL button
once. The REC light will flash. To resume recording, press
the REC(ord)/OTR button or press the PAUSE/STILL
button again. The REC light will come on again.
9
To stop recording, press the STOP/p button.
1
Turn on the TV.
2
Insert a tape in the VCR.
4
5
6
7
8
9
3
Press the VCR button.
3
VRZ262(H1920).QX33 4/9/99 9:33 AM Page 27