Filter
Top Products
iPronto User Guide
10
Installing and Recharging the Battery
Installing
After installing the Wireless LAN Adapter, you install the battery. The battery is precharged, but it is advisable to
charge the battery for three hours when you start using the iPronto. See Recharging on page 13.
Insert the battery as follows:
1 Lift the stand (figure 1).
2 Open the battery cover by pushing the grips and sliding off the cover in the direction indicated below
(figure 2).
Figure 1 Figure 2
iPronto.qxd 01-08-2002 08:44 Pagina 10