Pioneer BDP440 Blu-ray Player User Manual


 
21
En
02
BDP-140
Note
To switch the video from the AV receiver or amplifier,
also connect the video output terminals.
Connecting components
to the USB port
The data downloaded with the BD-LIVE function and the
data used with the BONUSVIEW function when playing
BD-ROMs can be stored on a device connected to the
USB port (USB memory).
About USB memory devices
The USB memory devices that can be connected to the
player are as shown below.
•USB 2.0-compatible memory devices
•FAT16 or FAT32 file system, minimum 1 GB capacity
(2 GB or more recommended)
Note
Devices formatted with a file system other than the
above cannot be used. Such devices may however be
usable if they are formatted from the player.
•USB memory devices may not be recognized if they
contain multiple partitions.
Some USB memory devices may not operate with this
player.
•Operation of USB memory devices is not guaranteed.
Connecting the USB memory
device
Caution
•Be sure to turn the player’s power off before
connecting or disconnecting USB memory devices.
•Use empty USB memory devices (on which nothing is
stored).
If the USB memory device is write-protected, be sure
to disable the write-protection.
Placing excessive loads on the plug may result in
poor contact, making it impossible to write data on
the USB memory device.
When a USB memory device is connected and the
player’s power is turned on, do not unplug the power
cord.
•USB external hard disks cannot be connected to the
player.
BDP-440
BDP-140
Note
•Devices may not work if connected to the USB por
t via
a memory card reader or USB hub.
Player’s rear panel
To audio input terminals
AV receiver or
amplifier
Direction of signal flow
2-channel analog
audio can also be
connected.
To optical digital
audio input terminal
Optical digital audio
cable (commercially
available)
Red
White
Video/audio cable
(included)
USB memory device
Player’s front panel
USB memory device
Player’s rear panel
USB memory device
Player’s rear panel
BDP-140_UCXCNSM_IBD_EN.book Page 21 Tuesday, July 19, 2011 10:54 AM