Filter
Top Products
07
46
En
Software updating
The player’s software can be updated using one of the
methods shown below.
• Connecting to the Internet.
• Using a disc.
• Using a USB memory device.
Product information on this player is provided on the
Pioneer website. Check the website shown on page 7 for
update and service information on your Blu-ray disc
player.
Caution
•Do not unplug the power cord or remove the USB
memory device/disc during software updating.
Otherwise, the updating will be aborted and
malfunction may occur with the player.
•There are two processes for software updating,
downloading and u
pdating. Both processes may take
a certain period of time.
•Other operations are defeated during software
updating. Furthermore, updating process cannot be
canceled.
•When the front panel display is off, turn it on with FL
DIMMER. When updating the player’s software with
the front panel display off, do not unplug the power
cord until the unit turns off.
Updating connecting to the Internet
Note
•Depending on the Internet connection conditions,
downloading may take a long time.
•Steps 1 to
5 are the operations performed by the user
(they are intended to download the software from the
Internet).
•Steps 6 to
8 are the operations performed
(automatically) by the player (they are intended to
update the software).
1 Connect to the Internet.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options Update Network
Start.
Use / to select, then press ENTER.
5 Select and set Start.
Press ENTER.
6 Downloading of the software start.
The software download status is displayed on the screen.
•Depending on the Internet connection conditions,
software downloading may take a certain period of
time.
7 Updating starts.
•Software updating may take a certain period of time.
8 Updating completes.
Updating using a USB memory
device/disc
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB memory device or disc. Carefully read the
instructions on downloading update files provided on
the Pioneer website.
•Store the update file in the root directory of the USB
memory device or disc. Do not store it within a folder.
•Do not put any files other than the update file on the
USB memory device or disc.
•To update using a disc, use a CD-R or CD-RW disc.
•The player supports USB memory devices formatted
in FAT32/16. When formatting a USB memory device
on your computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
•Only store the most
recent update file on the USB
memory device or disc.
• Do not use a USB extension cable to connect a USB
memory device to the player. Using a USB extension
cable may prevent the player from performing
correctly.
•Steps 1 to
5 are the operations performed by the user.
•Steps 6 to
7 are the operations performed
(automatically) by the player (they are intended to
update the software).
1 Plug in the USB memory device or load the disc on
which the update file is stored.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
BDP-140_UCXCNSM_IBD_EN.book Page 46 Tuesday, July 19, 2011 10:54 AM