Filter
Top Products
WARNING: THE APPARATUS IS NOT
WATERPROOFS, TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPARUTUS TO RAIN OR
MOISTURE AND DO NOT PUT ANY WATER SOURCE
NEAR THIS APPARATUS, SUCH AS VASE, FLOWER POT,
COSMETICS CONTAINER AND MEDICINE BOTTLE ETC.
H001AEn
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product's enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
IMPORTANT
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
H002_En
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
H018A_En
CAUTION
This product contains a laser diode of higher class
than 1. To ensure continued safety, do not remove
any covers or attempt to gain access to the inside of
the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: rear of the unit
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable opera-
tion of the product and to protect it from overheating,
to prevent fire hazard, the openings should never be
blocked and covered with items, such as newspapers,
table-cloths, curtains, etc. Also do not put the appara-
tus on the thick carpet, bed, sofa, or fabric having a thick
pile.
H040_En
WARNING: BEFORE PLUGGING IN THE UNIT
FOR THE FIRST TIME, READ THE FOLLOWING SECTION
CAREFULLY. THE VOLTAGE OF THE AVAILABLE POWER
SUPPLY DIFFERS ACCORDING TO COUNTRY OR
REGION. BE SURE THAT THE POWER SUPPLY VOLTAGE
OF THE AREA WHERE THIS UNIT WILL BE USED MEETS
THE REQUIRED VOLTAGE (E.G., 230V OR 120V) WRIT-
TEN ON THE REAR PANEL.
H041A_En
WARNING: NO NAKED FLAME SOURCES,
SUCH AS LIGHTED CANDLE, SHOULD BE PLACED ON
THE APPARATUS. IF NAKED FLAME SOURCES ACCI-
DENTALLY FALL DOWN, FIRE SPREAD OVER THE AP-
PARATUS THEN MAY CAUSE FIRE.
H044 En
OPERATING ENVIRONMENT
Operating environment temperature and humidity:
+5°C – +35°C (+41°F – +95°F); less than 85%RH (cooling
vents not blocked)
Do not install in the following locations
÷ LOCATION EXPOSED TO DIRECT SUNLIGHT OR
STRONG ARTIFICIAL LIGHT
÷ LOCATION EXPOSED TO HIGH HUMIDITY, OR POORLY
VENTILATED LOCATION
H045_En
[Except Taiwanese model]
[Except Taiwanese model]
On the top of the player
CLASS 1
LASER PRODUCT