Filter
Top Products
The Audio Settings Menu
06
38
En
1 Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
2 Highlight Virtual Surround, then use
the
/
buttons (cursor left/right) to
change to ‘2V/TruSurround’ or ‘Off’, as
required.
Audio Settings
Audio DRC
Virtual Surround
Off
Off
3 Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND
button on the remote control to switch
Virtual Surround on (2V/
TruSurround)/Off.
• Virtual Surround doesn’t work with DTS
or 96kHz linear PCM audio, or during
MP3 playback, through either the
analog or digital outputs.
• If the player is outputting Dolby Digital
or MPEG bitstream audio (in other
words, no conversion to PCM), Virtual
Surround has no effect on the audio
from the digital output. See pages 39–
40 for how to set up the digital output
formats.
• How good the surround effect is varies
with the disc.