Filter
Top Products
<DRC1083>
En
7
A HARDWARE TOUR
1 Disc loading slot
Insert the DVD-ROM or CD-ROM with the label facing up.
When using 8 cm (3.15-inch) discs, attach a CD adapter (available at stores) to the
disc, and insert the disc into the disc loading slot. (Refer to page 12.)
2 Eject (0) button
This button is used to eject the disc.
3 BUSY indicator
Flashes during data access.
4 DVD indicator
Lights when a DVD is loaded.
5 Volume Control (headphone level)
This is used to adjust the volume level of the headphone jack.
6 Headphone jack (PHONES)
This is a stereo minijack for headphones.
7 Hole for forced ejection
When the eject button has lost its function, insert an accessory pin for emergency
ejection into this hole and push to eject the disc. (Refer to page 13.)
WARNING:
÷
Before executing this operation, be sure to switch off the power supply of the
computer and confirm that the disc loading is stopped. It takes approx. 30 seconds
to stop loading a disc after switching off the power supply.
÷
Always use the pin provided (Do not use other objects).
Fig. 1
Illustrations are provided in this chapter as a visual introduction to the Drive.
Please Familiarize yourself with these illustrations and refer to them when necessary
to complete the installation and operation of the unit.
DVD-ROM DRIVE
BUSY
DVD
PHONES
5
2
3
4
6
7
1
FRONT VIEW