Filter
Top Products
34
En
DVD.
Dolby Digital Output
If the amplifier does not support Dolby Digital*, select the
[Dolby Digital 3 PCM] setting.
Press
SETUP
The initial Setup menu is displayed.
Select [Audio 1]
Select [Dolby Digital Out]
Press the arrow button
(right direction)
Select the preferred item
Press
ENTER
Dolby Digital:For amplifiers and decoders
which support Dolby Digital
(default setting when shipped)
Dolby Digital 3 PCM:Converts a Dolby Digital signal
to a linear PCM signal if the
amplifier does not support Dolby
Digital technology
Press
SETUP
DVD.
DTS Output
When the connected amplifier supports DTS**, set to [DTS].
Press
SETUP
The initial setup menu is displayed.
Select [Audio 1]
Select [DTS Out]
Press the arrow button
(right direction)
Select the preferred output
Press
ENTER
OFF: For amplifiers that do not support DTS
(default setting when shipped)
DTS: For amplifiers and decoders which support
DTS output
Press
SETUP
Setting the Digital Output
The type of digital signal corresponding to the amplifier can be selected through the player. Improper settings may
cause noise or feedback. Review the information below and refer to the Operating Manual for the amplifier.
DTS Out -
96kHz PCM Out - 96kHz 3 48kHz
MPEG Ou
t - MPEG 3 PCM
Digital Ou
t - Off
Audio1
General
Language
Video
2
Move
Exit
Dolby Digital 3 PCM
Dolby Digital
SETUP
Dolby Digital Out -
96kHz PCM Out - DTS
MPEG Ou
t - MPEG 3 PCM
DTS Out -
Digital Ou
t - Off
Audio1
General
Language
Video
2
Move
Exit
Off
Dolby Digital
SETUP
Dolby Digital Out -
**
“DTS” and “DTS Digital ” are trademarks of Digital Theater
Systems, Inc. Manufactured under license from Digital
Theater Systems, Inc.