Filter
Top Products
4
En
8.Barcode/Command Stack
When segment commands and barcodes are added to
the player in advance, images can be switched
and played back one after the other. This is very
convenient for demonstrations, presentations, etc.
The RS-232C connection allows uploading and
downloading of the set content (see page 53).
÷
Upload/download is performed easily through a
dedicated application.
9.Interface with External Signals
(RS-232C, external option switch)
The device is fitted with an RS-232C connection so that
commands support DVD, Video CD and CD technology.
The control protocol is compatible with LD (Laser Disc)
equipment with LD signals transferring easily.
In addition to the RS-232C connector, a terminal for the
external option switch is provided. By simply connecting
a switch to this terminal, operations through a DVD menu
selection, barcode/command stack calls as well as
commands with the remote control are possible.
÷
Consult the DVD-V7200 User’s Manual forinformation
regarding this terminal and RS-232C control commands
(see your dealer for more information about the User’s
manual).
10.Video Blackboard Function
Graphics and characters input in advance at any desired
positions on the DVD picture screen will appear during
playback.
This function enables demonstrations and presentations
to be performed more effectively (see page 71).
11.Laser Barcode Compatibility
The laser barcodes previously used with LD (Laser
Disc) players supports most DVD applications. Existing
barcode scanners and readers function properly with
this player. (see page 59).
12.Video Text Retrieval (VTR)
Use the mouse to click on buttons displayed during
DVD playback for display of text files corresponding to
the selected button. This feature is only available on
discs authored with Video Text Retrieval compatible discs
(see page 77).
13.External Synchronizing Function
This terminal allows output of video signals linked to an
external sync signal (see page 77).
Component Features and Functions
1.High-Reliability, high-Endurance Player
This DVD player features a high-performance brushless
spindle motor. The mechanical components are also
sealed against heat and dust, giving this unit improved
reliability.
2.NTSC/PAL Dual Playback
DVD discs in either the NTSC format or the PAL format
are playable (See page 79)
3.Frame Search Function
Searching in units smaller than individual chapters is
possible in this mode (see page 14).
While using frame segment playback, it is possible to
play any point to any point in a video then continue the
playback at the end (See page 55, 56).
÷
The frame search function cannot be used with a multi
PGC disc (time is not displayed on the TV screen) or
with a Video CD. Frame segment playback is possible
with through RS-232C control with a DVD barcode
or Barcode/Command stack.
4.High-Speed Search
With improved memory cache and a search algorithm,
search speed is now at 1.3X reading speed (see
page 13, 14).
5.Enhanced Special Playback
This player enables the DVD and Video CD playback
speed to be changed in several ways. Slow Forward,
Slow Reverse, Scan and Frame Forward/Reverse are
easily selectable (see page 12, 14, 15).
÷
To perform Reverse Slow playback, select Frame from
the REV STEP/REV PLAY page of the ADV.SETUP
Menu. Slow play is only possible in the forward
direction on a Video CD.
6.Mouse Control
Instead of the remote control, a PS/2* pointing device
can be used to control the player if desired. A mouse
allows selecting specific locations by the point-and-click
method (see page 43).
* PS/2 is a registered trademark of IBM corporation
7.Weekly Timer/Power ON Start Function
The times for Power ON/OFF and for video playback of
a disc can be set for each day within one day or within
a week. Combined with the barcode/command stack,
program playback is also possible. This player is limited
to a maximum of 24 setting at one time (see page 44,52)