Filter
Top Products
57
En
Advanced Operations
Example 5:To input the command for setting Subtitle 1,
Audio 2 and Angle 3
÷
A Play command that specifies the start and end frames, voids
any possibility of setting a Subtitle, Audio and Angle option.
However, by setting Subtitle, Audio and Angle selections (as
described in the above procedure) before the Frame Sec-
tion Play command, the playback includes these options.
The input as shown above plays Title 3 Frames 10000 to 15000
with Subtitle 1, Audio 2 and Angle 3.
Commands other than Frame Section Play command, such
as Fame Search, Chapter Search and Chapter Section Play
commands, a specific setting is valid within each command.
Example 6:To repeat “Play Title 3 frames 123000 to
129000” in Example 3
1.When the word TITLE is blinking, enter
“00” in the TITLE field
÷
Do NOTpress
NEXT
2.Press
SUBTITLE
while the TITLE digits are
blinking
3. When the SUBTITLE digits start to blink,
press
1
then
NEXT
4.When the AUDIO digit starts to blink,
press
2
5.When the ANGLE digital starts to blink,
press
3
1. Perform steps 1 through 4 in Example 3
÷
The Barcode/Command Stack input screen appears
2. Press
RPT A-B
while the TITLE number is
blinking
÷
The REPEAT indicator appears on screen
BC/COMMAND STACK GROUP 001: 001
TITLE 00
SEARCH FRAME 000000
MARK FRAME - - - - - -
SUBTITLE 01
AUDIO 2
ANGLE 3
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001/ 001
001 SUBTITLE 01 AUDIO 2 ANGLE 3
002 03:10000–15000
003
004
005
006
007
008
SAVE DEL INS EXIT
Press
DISPLAY
to display the
following screen
Item display
List display
1.
2.
BC/COMMAND STACK GROUP 001: 001
TITLE 03
SEARCH FRAME 123000
MARK FRAME 129000
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 002
TITLE 00
SEARCH FRAME 000000
MARK FRAME - - - - - -
SUBTITLE *
AUDIO *
ANGLE *
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 002
REPEAT