Filter
Top Products
51
En
Advanced Operations
DVD.
I
Video CD
.
I
CD .
Setting the Power On Start
Function
1 Move the ‰ (pointer) to “POWER ON START”
by pressing
or
2.
Set it to ON using the
or
buttons
3. Press
ENTER
÷
The POWER ON START option screen is displayed
1. Playing the top menu
÷
Move the ‰ (pointer) to 1. TOP MENU and press
ENTER
2.Playing the specified Title and Chapter
÷
Move the ‰ (pointer) to 2. TITLE and press
ENTER
.
Example: To begin playback with Chapter 2 of Title 6
NOTE
÷
When playing CDs/Video CDs, the player ignores the
Title entry and sees the Chapter as a track number.
Barcode Commands are valid for CD Barcodes only*.
Power On Start Function
1.TOP MENU:
Playing from the top menu screen
2.TITLE:
Playing the specified Title and Chapter
3.BARCODE/COMMAND STACK:
Recalling and executing the Barcode/Command
Stack groups in memory
÷
Select one of the above with
or
and
press
ENTER
A: Press
0
=
6
=
NEXT
=
0
=
2
=
NEXT
B:Press
or
to select 06 and
press
ENTER
to start setting the next
set of figures. Press either the
or
to select 02 and press
ENTER
You can set the POWER ON START function with
the mouse as well as with the remote control.
÷
Where
is displayed, click with the left mouse button
to change selections or settings.
÷
Clicking on a number with the left mouse button
increases the number by 1. Each time you click on a
number with the right mouse button, it decreases by 1.
POWER ON START
1.TOP MENU
2.TITLE
3.BARCODE/COMMAND STACK
RETURN
ENTER
1-2
3
«
POWER ON START
1.TOP MENU
2.TITLE
TITLE 06 CHAPTER 02
3.BARCODE/COMMAND STACK
RETURN
ENTER
ADV.SETUP page 1/2
WEEKLY TIMER OFF
POWER ON START T06:C02
TITLE PLAY MODE Single
REPEAT MODE OFF
BAUD RATE
4800bps
TRAY LOCK OFF
BLACKBOARD LOCK OFF
STACK MODE OSD ON
REV STEP/REV PLAY VOBU
Exit
SETUP
ADV.SETUP page 1/2
WEEKLY TIMER OFF
POWER ON START OFF
TITLE PLAY MODE Single
REPEAT MODE OFF
BAUD RATE
4800bps
TRAY LOCK OFF
BLACKBOARD LOCK OFF
STACK MODE OSD ON
REV STEP/REV PLAY VOBU
Exit
SETUP
In the case of 1
In the case of 2
In the case of 3
÷
Select ENTER on the screen to save the setting and exit
the screen. Select RETURN to cancel the setting and return
to the previous screen.
Selecting the special Title and Chapter
* Barcode Commands designed for CDs are acceptable. However, Barcode
Command Stacks are unavailable for CDs and Video CDs. DVD Barcode
Commands and Stack Groups function properly on the DVD-V7400.