Filter
Top Products
58
En
Example 7: a command to jump to another group
To change the group number on a previously input “GO
TO GROUP”, press
RECALL
during Detailed or List display, and
input the new number.
Using this command enables consecutive jumps to different
groups.
\/ conceptual representation only
Create standby display groups to return to the same point
as before a jump to another group.
\/ conceptual representation only
DVD.
Setting the Subtitle, Audio
and Angle
SUBTITLE
÷
“00” changes screen color to the selelcted “Background
color” in the GUI menu and makes a played image invisible
÷
“01” to “32” displays the corresponding Subtitle
÷
“33” plays with all Subtitles off
÷
“34” hides the played image with "00" to reveal the played
image again
÷
“99” retains the previous condition. This is used to change
settings other than SUBTITLE while maintaining the current
Subtitle setting
÷
“35” to “98” are invalid settings
AUDIO
÷
“0” plays image with Audio off
÷
“1” to “8” selects and plays the corresponding audio
÷
“9” retains the previous condition
ANGLE
÷
“1” to “8” selects and plays the corresponding angle
÷
“9” retains the previous condition
÷
“0” selects and plays Angle 9
NOTE
÷
When “retain the previous condition” is selected, an asterisk
(*) appears on the input screen.
÷
The Barcode/Command Stack cannot be executed if a value
unavailable on that disc is input.
DVD.
To Only Use A Chapter
Search or Frame Search
In item “MARK CHAPTER” or “MARK FRAME”, press
NEXT
without making any settings
A still image displays after the search is complete
DVD.
To Change a Value
During Input
Press the correct number button (including 0)
To return to a previous setting point, press
PREV
.
DVD.
Cancel a Value During Input
Move the ‰ (pointer) to “EXIT” by pressing the cursor button
(right direction) and press
ENTER
1. When the TITLE number
is flashing, press
RECALL
.
2.The display changes
as shown to the left
(refer to diagram).
3. Input the group number
to jump to, then
press
NEXT
.
GO TO GROUP - 002
*
*
*
*
GROUP - 001
GO TO GROUP - 004
*
*
*
*
GROUP - 002
GO TO GROUP - 010
*
*
*
*
GROUP - 004
REPEAT
*
*
*
*
GROUP - 001
GO TO GROUP - 001
GROUP - 002
*
*
*
*
GO TO GROUP - 001
*
*
*
*
GROUP - 004
GO TO GROUP - 001
*
*
*
*
GROUP - 003
Example:
RECALL 002 + PLAY
or
External option switch
Group 002
Example:
RECALL 003 + PLAY
or
External option switch
Group 003
Example:
RECALL 004 + PLAY
or
External option switch
Group 004
Jump
Barcode/Command Stack Setting
BC/COMMAND STACK GROUP 004: 003
GO TO GROUP - 000