Filter
Top Products
76
En
DVD.
Recalling/Executing
Previously Input Blackboards
While Observing the List
1
Press
RECALL
twice
2 Press
DISPLAY
÷
Displays a list of commands
3
Select a group by pressing
PREV
NEXT
/
4
Select a step by pressing
/
5
Press
ENTER
NOTE:
Press
CLEAR
to remove any displayed characters or pictures.
However, characters and pictures set using the button,
AUTO DISP
cannot be erased with
CLEAR
.
Display of Recalled Characters and Pictures
When recalling usingthe command, “Executing an entire group,”
images display in the order of the set start point locations
rather than by register order. When a character or picture
is set to display while another image is already displayed,
the second character/picture superimposes on top of the
existing image. All images remain on screen until the last
display end point among all set display points is reached.
÷
When pictures A and B are displayed, picture B appears
after the display of picture A has ended
÷
When pictures A and C are displayed, picture C appears
over picture A which is already displayed with the display of
pictures A and C ending at the picture C end point.
÷
When pictures C and D are displayed, picture D appears
over picture C which is already displayed. The display of
pictures C and D ends at the picture C end point.
GROUP 001
001 R–1, 02-002. 41~032.06 A
002 B–3, 01-027. 30~035.08 A
Example
Time Flow
Start point End point
Start point End point
Start point End point
Start point End point
YLW
GRN
Select the group
Select the step
Grouping Video Blackboards