Filter
Top Products
59
En
Advanced Operations
Setting of LaserBarcode-Compatible Discs
Example: Playback of “analog stereo” audio channel
from frame 1500 to 1800 but without video
Video, Audio Setup
VIDEO:
÷
Inputting 1 selects normal video output
÷
Inputting 0 selects the background color set on the GUI
menu and cancels the playback
÷
Inputting 9 maintains the previous mode (this setting
leaves the VIDEO at the current selection)
÷
2 to 8 are invalid
AUDIO:
On LaserBarcode-compatible discs, laser disc digital audio
and analog audio are converted and recorded in the DVD
format.
Audio Selections:
÷
Inputting 0 selects Audio OFF
÷
Inputting 1 selects Analog Audio 1/L
÷
Inputting 2 selects Analog Audio 2/R
÷
Inputting 3 selects Analog Audio Stereo
÷
Inputting 5 selects Digital Audio 1/L
÷
Inputting 6 selects Digital Audio 2/R
÷
Inputting 7 selects Digital Audio Stereo
÷
Inputting 9 maintains the previous mode
÷
4 and 8 are invalid
1. Press
TITLE/CHP
FRM/TIME
÷
The TITLE number blinks
2. Press
NEXT
to display LD
÷
Verify that the LaserBarcode-compatible
command is set to TITLE LD display.
3.Press
1
=
5
=
0
=
0
=
NEXT
÷
Enter the Starting Frame number
÷
If this command is sent while a disc is playing,
the Search begins for the Start Frame.
4.Press
1
=
8
=
0
=
0
=
NEXT
÷
Enter the Ending Frame number
5.As the VIDEO number begins to blink,
press
0
÷
The image on screen disappears
6.As the AUDIO number begins to blink,
press
3
÷
Audio is entered and the screen advances to the next
BC/COMMAND STACK GROUP 001: 001
TITLE LD
SEARCH FRAME 01500
MARK FRAME 01800
VIDEO 0
AUDIO 3
NOTE:
Pressing
TITLE/CHP
FRM/TIME
after step 2 selects Chapter input mode.
See page 56 for SEARCH CHAPTER and MARK
CHAPTER input methods.
NOTE:
When “Maintaining Previous Mode” is selected, an “
✽
”
appears on the input screen.
Example screen
step