Filter
Top Products
74
En
DVD.
To Change the Display Mode
1. Move the cursor to the line you want to
change and click the left mouse button.
2. Move the cursor to
AUTO DISP
and click the left
mouse button.
(Indicator display on the right edge of screen)
A:Displays at the same time as the disc playback,
from the set start point through the end point.
AS:The video becomes a still image at the set start
point.
–AS:The video becomes a still image immediately
before the set start point.
No display:The set characters or pictures are hidden.
Pressing
ENTER
in this section revels the drawing(s).
S:The video becomes the still image at the set start
point but objects are hidden.
Press
ENTER
on the remote control to reveal or start
drawing pictures.
✽:The ✽ mark displays at the top right of the screen
during playback.
Pressing
ENTER
in this section starts the drawing.
✽S:The video becomes a still image, in which only the
✽ mark is displayed, at the set start point.
Press
ENTER
on the remote control to start drawing.
Meaning of Displayed Symbols
“S”stands for “Still image”; plays a still image at the IN point
“A”stands for “Auto display”; displays drawing (AUTO DISP)
“✽”displays only the ✽ mark on an empty screen
“–”displays a still image immediately before the IN point
DVD.
Pencil Tool/Freehand Drawing
Click the right mouse button from within the video blackboard
input screen to turn the pointer in to the pencil tool. Hold down
the left mouse button to freehand draw. Clicking the right mouse
button again to display the Blackboard screen.
To change the color or line width, select
COLR
or
tool on the
Blackboard screen (see “Drawing Tools” on page 72).
NOTE:
÷
Pictures can be drawn using the pencil tool but are later
lost when the power is turned OFF.
GROUP 001
001 R–3, RED 02-015.29~015.36 A
AUTO DISP
DEL
EXIT
SAVE
Indicator on the top of right
Character Input/Output Drawing (DVD Video Blackboard)
Notes
÷
It takes time to draw a graphical image. If the image needs
to hide part of the video, the image-drawing IN point must
be set in advance of the desired scene. Creation time
varies according to the type of drawn graphic and to the
number of drawings. The drawing time is usually in range of
10 to 30 frames.
÷
If different graphics are recorded in adjacent frames, they
may fail to display during continuous playback because
of drawing speed constraints.
÷
Drawings are hidden during Frame Reverse or Reverse
Play.
Draw by holding down the left mouse button and dragging the cursor.