Filter
Top Products
41
En
Advanced Operations
DVD.
I
Video CD
.
I
CD.
To Access the ADV. SETUP menu
Press and hold
SETUP
for one second
The Advanced Setup (ADV.SETUP) menu is shown to the left.
To set a parameter, such as the weekly timer, select
WEEKLY TIMER with
, set ON/OFF with the
. If a parameter is set ON, press
ENTER
and perform the
setting instructions as prompted on the screen.
For Power-ON Start, select POWER ON START with the
, set ON/OFF with the
. If a parameter
is set ON, press
ENTER
, set ON/OFF to ON and perform the
setting instructions as prompted on the screen.
A similar procedure is used to set the other parameters with
and set ON/OFF with the
.
4 REPEAT MODE
Select OFF/CHAPTER/TITLE/DISC from the menu.
Set ALL,DISC under the TITLE PLAY MODE option
OFF: Title(s) plays back once and does not repeat
(DVD, Video CD, CD)
CHAPTER: The selected chapter only repeats (DVD)
One selected track only repeats (Video CD, CD)
TITLE: The selected Title repeats (DVD)
The entire disc repeats (Video CD, CD)
DISC: The entire disc repeats (DVD only)
5 BAUD RATE
This sets the baud rate of the RS-232C interface at either
4800 bps or 9600 bps.
6 TRAY LOCK
When set to ON, the disc tray ignores request to open or
to close.
7 BLACKBOARD LOCK
When set to ON, video blackboard input is ignored.
8 STACK MODE OSD
This switches the OSD ON/OFF during stack playback.
ON: The STACK display appears on creen when exexuting
or search a stack.
OFF: The STACK display is hidden.
1 WEEKLY TIMER
A timer for turning the power ON and OFF can be set for each
each day of the week; as well as setting the title and chapter.
The player is limited to a maximum of 24 settings of
unmanned operations at a time.
OFF:WEEKLY TIMER is deactivated
ON:WEEKLY TIMER is available
2 POWER ON START
This function sets whether or not automatic playback is to start
when the power is switched ON.
OFF:POWER ON START is deactivated
ON:POWER ON START is available
It is necessary to identify the Title and Chapter as a
starting point for playback. If this starting point is
not identified, the player waits in the Stop mode.
3 TITLE PLAY MODE
Single:When a single Title has been selected, the DVD
player stops at the end of that Title.
All:Each Title on a DVD disc plays before the player
stops.
In order to set up the unique functions on the DVD-V7400, there are settings for 16 parameters
available through the remote control.
ADV. SETUP MENU settings
ADV.SETUP page 1/2
WEEKLY TIMER OFF
POWER ON START OFF
TITLE PLAY MODE Single
REPEAT MODE OFF
BAUD RATE
4800bps
TRAY LOCK OFF
BLACKBOARD LOCK OFF
STACK MODE OSD ON
REV STEP/REV PLAY VOBU
Exit
SETUP
ADV.SETUP page 2/2
PLAYER CONTRL PANEL Selectable
SETUP LOCK(MOUSE) ON
EXTERNAL OPTION SW Standard
SYNC OUT (DURING SQ) OFF
EXTERNAL SYNC OFF
AV SYNC COMPENSATE ON
Exit
SETUP
Above picture indicates the initial settings.