Filter
Top Products
84
En
When used in wireless mode:
Optional LaserBarcode Scanner
UC-V108BC
When used in wired mode:
Optional LaserBarcode Scanner
UC-V108BC
Using a Laser Barcode Scanner (sold separately)
Laser Barcode Scanner
To use an optional LaserBarcode Scanner (UC-V108BC or
UC-V109BC) in the wired mode to transmit signals, connect
the LaserBarcode scanner’s connection cord to the player’s
front-panel EXT.CONT jack.
To transmit barcode signals in the wireless mode, aim the
remote control towards the player’s signal receiver.
Consult the LaserBarcode Scanner’s Operating Instructions
for operation details.
Note:
÷During operations using the LaserBarcode Scanner, sending
commands from a computer may cause malfunctions.
This includes sending commands through the remote
control, the front panel and serial signals.
When using the LaserBarcode Scanner in the wired mode,
the remote control is disabled in order to prevent erroneous
commands from being sent. Thus, Pioneer recommends
using the wired mode.
÷When the player is operated via barcodes, some on-screen
displays Play and Stop are hidd
(refer to the DVD-V7400 Command Protocol manual for details)
en.
÷Barcode commands issued for LD and DVD are ignored
when a CD or CD Video disc is loaded.
÷When a DVD is loaded, commands issued for CDs are
ignored.
7m
30°
30°