Pioneer DVD-V7400 DVD Player User Manual


 
7
En
÷
The marks shown below are found on disc labels or on disc
jackets.
÷
The DVD-V7400 plays discs bearing the marks below
without needing an adaptor.
÷
This player can play discs recorded in either PAL or NTSC
format. Use discs marked with “NTSC” or “PAL” on the
jacket or sleeve.
7 DVD
identification markings
The following symbols are added to DVD discs and packaging
to indicate the type of video or audio and the functions
supported by the disc:
7 Disc
operation methods
The DVD operation method depends on the intention of the
disc creator, there are some discs that prohibit specific
operations. Depending upon the disc, the operation method
differs thus specific operations may not be possible. If a
specific operation has been prohibited, the "Disc prohibition"
mark is displayed on the screen. If a disc is authored to allow
interactive operations through the menu and during playback,
some operations such as Repeat and Program may not be
possible. In this case, the "Prohibition due to the Player"
mark is displayed on the screen.
Disc prohibition
Prohibition due to the player
Disc types compatible with this unit
÷The following discs cannot be played on this player:
DVD audio, DVD-ROM, CD-ROM, DVD with region
codes other than 1 or ALL
÷Do not use an 8cm (3˝) adaptor with this player
Types of
playable discs
and their marks
DVD VIDEO
VIDEO CD
CD
Diameter/Playable sides
DVD VIDEO
12 cm (5˝ )/single sided 1 layer
2 layer
12 cm (5˝)/double sided 1 layer
2 layer
DVD VIDEO
8 cm (3˝ )/single sided 1 layer
2 layer
8 cm (3˝ )/double sided 1 layer
2 layer
VIDEO CD
12 cm (5˝ )/single sided
VIDEO CD single
8 cm (3˝ )/single sided
CD
12 cm (5˝ )/single sided
CD single
8 cm (3˝ )/single sided
Mark Meaning
Number of the audio track
Number assigned to the subtitle language
Number of angles
Available picture aspect ratios
The region number where playback is possible
This player can play back discs which include
region number “1” and discs on which “ALL” is
inscribed
3
16 : 9 LB
2
2
1
ALL