Pioneer DVR-RT301-s DVD VCR Combo User Manual


 
Getting started
04
28
En
UNDO FINALIZE
You can cancel the finalization of a finalized DVD-RW (in
VR mode).
You cannot cancel the finalization for discs other than
above. You can record or edit on a disc whose finaliza-
tion has been cancelled.
Select “UNDO FINALIZE”, and the screen below will
appear.
UNDO FINALIZE
START CANCEL
When you select “START” and press ENTER, the
cancelling finalization will start. The screen below
will appear.
UNFINALIZING
PLEASE WAIT
• When you select “CANCEL” and press ENTER, the
DISC SETUP screen will appear.
Note
During the cancelling finalization the cursor will
move repeatedly.
The cancelling finalization process may require a
few minutes to about 1 hour according to disc type
or the amount of free space on the disc.
When the disc’s finalization cannot be cancelled,
you cannot select “UNDO FINALIZE”.
You can turn the display window and screen
display “ON” or “OFF”.
Preparation:
•Turn ON the TV and set it to the video input mode.
Select “OTHER” from “SYSTEM SETUP”. For the
procedure, see steps 1 to 3 in “Using the SETUP
MENU” on page 23.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
LANGUAGE
PARENTAL
CLOCK
DISC SETUP
OTHER
SETUP MENU
ENTER
RETURN SETUPENTER BACK END
SELECT
OTHER
DIMMER
DISPLAY
AUTOMATIC
ON
FINALIZE
To play a DVD disc recorded on this unit you must
finalize the disc to insure compatibility with other DVD
players. In addition if you are using a DVD-RW disc you
must record in Video mode.
When “FINALIZE” is selected, the screen below will
appear.
FINALIZE
START CANCEL
When you select “START” and press ENTER, final-
ization will start. The screen below will appear.
FINALIZING
PLEASE WAIT
When you select “CANCEL” and press ENTER, the
DISC SETUP screen will appear.
Note
During the finalization the cursor will move
repeatedly. When the finalization finished, “DISC
FINALIZED” will appear.
The finalization process may require a few minutes
to about 1 hour according to disc type or the
amount of free space on the disc.
•You can record or edit a finalized DVD-RW (in VR
mode) by cancelling the finalizing, but you cannot
do these operations with a DVD-RW (Video mode),
or with a DVD-R.
•You cannot playback a disc recorded on VR mode
on a unit that does not support DVD-RW.
Even if you finalize a disc in the Video mode, the
disc cannot be played back in some DVD players.
•A DVD-R disc cannot be named after it is finalized.
PROTECT DISC
You can protect a disc to prevent the content recorded
on it from being erased, edited or re-recorded.
Only DVD-RW (in VR mode) can be protected.
Select “PROTECT DISC” and select “ON” to protect the
disc.
To cancel the disc protection, select “OFF”.
2G00201B_En_22_32 8/4/05, 10:5428