Filter
Top Products
ADJUSTING AUDIO AND VIDEO SETTINGS
31
En
Digital Out
Expert
Depending on your preferences and the type of
connections made, you may opt not to have the digital
audio signal output at all. When this setting is set to
[Off] there is no signal output from the digital audio
output jacks.
Make changes to the [Digital Out] setting in the Setup
screen Audio 1 menu in the [Expert] menu mode (page 29).
MPEG Ou
t – MPEG 3 PCM
Dolby Digital Out –
DTS Out –
Linear PCM Out – Down Sample On
Move
Exit
Dolby Digital
Off
SETUP
Audio1 Audio2 GeneralLanguageVideo
Digital Out On
Off
On
MPEG Out
This player is capable of outputting the MPEG digital
bitstream. When the player is connected to an AV
component that has a built-in MPEG decoder, select the
[MPEG] setting. Otherwise, select [MPEG 3 PCM] to
convert the digital signal to the PCM signal, the digital
signal output from a CD.
Settings: MPEG
MPEG 3 PCM*
* Factory setting
Settings: On (Digital signal is output)*
Off (Digital signal is not output)
* Factory setting
MPEG Ou
t - PCM
Dolby Digital Out –
DTS Out –
Linear PCM Out – Down Sample On
Move
Exit
Dolby Digital
Off
SETUP
Audio1 Audio2 GeneralLanguageVideo
Digital Out – On
MPEG 3 PCM
MPEG
Adjusting the Dynamic Range
of the Audio Soundtrack – DVD
Audio DRC stands for Audio Dynamic Range
Compression. When Audio DRC is on, soft sounds such
as dialog can be heard more clearly without making loud
sounds even louder. Select from three levels of
compression depending on how much effect you want.
When Audio DRC is set to [Off], there is no effect on
the audio source.
Make changes to the [Audio DRC] setting in the Setup
screen Audio 2 menu.
Audio Out –
Speaker Setting
Gain Setting –
CD Digital Direct – Off
Audio DRC
Move
Exit
High
Medium
Low
Off
SETUP
Audio1 Audio2 GeneralLanguageVideo
Settings: High
(maximum compression of audio source)
Medium
(moderate compression of audio source)
Low
(very little compression of audio source)
Off*
* Factory setting
Note
Audio DRC is only effective with Dolby Digital audio sources.