Filter
Top Products
Remote control
This units supplied remote control is mainly
for use by rear seat passengers. When using,
point at the remote control sensor.
1 CH CALL button
SRC : OSD ON mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
front and rear display.
SRC : OSD OFF mode
When the TV is selected as a source, or,
when the rear TV is on and the TV is not se-
lected as a source:
Channel information is displayed on the
rear display.
STAND ALONE mode
Press to display the current channel and
other settings (Confirming current channel
and other settings on page 16).
2 BAND button
SRC : OSD ON mode
Not used. Alternatively, use BAND on the
head unit.
SRC : OSD OFF mode
Not used. Alternatively, use BAND on the
head unit.
STAND ALONE mode
Press to select among two TV bands and to
cancel the control mode of functions.
3 MENU button
Not used.
4 a/b/c/d buttons
SRC : OSD ON mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
SRC : OSD OFF mode
Press to do manual seek tuning and preset
tuning. Also used for controlling functions.
STAND ALONE mode
Press to do manual seek tuning and preset
tuning.
5 POWER button
SRC : OSD ON mode
Press to turn the rear display on or off when
the TV is not selected as a source.
SRC : OSD OFF mode
Press to turn the rear display on or off when
the TV is not selected as a source.
STAND ALONE mode
Press to turn this unit on or off.
Other remote controls
You can also perform operations with the re-
mote controls shown below.
When using a Pioneer car DVD
players remote control
When using a remote control supplied with
SDV-P7, AVX-P7300DVD, XDV-P9, XDV-P9
II
.
1 r button
Press and hold to BSSM on or off.
2
5
3
1
4
Whats What
En
8
Section
03