Pioneer PDP 503CMX Flat Panel Television User Manual


 
21
En
Operations
English
Operations
Screen Size Selection
This unit incorporates screen modes of various height and
width ratios. For optimal viewing, we recommend that
you select the screen mode that best matches the video
source that you are viewing. Although these modes are
designed for full display of a picture on a wide screen, it is
our hope that you make use of them with a full
understanding of the manufacturers intentions.
Changing the screen size
The size of the image displayed on the screen, and the
range of the image shown can be set in one of four
modes on the PDP-503CMX, and in three modes on the
PDP-433CMX.
Press SCREEN SIZE to select the size.
The screen size changes each time SCREEN SIZE is
pressed as follows.
[PDP-503CMX]
[PDP-433CMX]
Consult the table Computer Signal Formats Supported
(pages 35 and 36) for information regarding screen sizes
supported by each signal format.
Notes
÷ When the PARTIAL or FULL setting is used to display a non-
wide screen 4:3 picture fully on a wide screen, a portion of the
picture may be cut off or appear deformed.
÷ Be aware that when the display is used for commercial or
public viewing purposes, selecting the PARTIAL or FULL mode
settings may violate the rights of authors protected under
copyright law.
÷ When DOT BY DOT or 4:3 screen sizes are selected, the
display position is moved slightly each time the power is
turned on, in order to prevent image burning.
3 DOT BY DOT 3 4:3
FULL 2
PARTIAL 2
During personal computer signal input
1 DOT BY DOT
The input signal and the screen maintain a dot to line ratio
of 1:1 and is thus highly faithful to the source.
[PDP-503CMX]
A
(Illustration shows 640 x 480 input.)
[PDP-433CMX]
* The PDP-433CMX is designed with horizontally
oblong elements, with the result that the image
displayed will appear more oblong than the original
input signal.
A
(Illustration shows 640 x 480 input.)
2 4:3
The display fills the screen as much as possible without
altering the aspect ratio of the input signal.
A
3 FULL
The display is presented with a widescreen aspect ratio
of 16:9 and fills the entire screen.
A
480 lines
768 lines
640 dots
1280 dots
3 DOT BY DOT 3 4:3
FULL 2
480 lines
768 lines
640 dots
1024 dots