Pioneer S-DV303 DVD Player User Manual


 
Additional information11
64
En
Problem
The disc is ejected automatically
after loading.
Playback is not possible.
Picture playback stops and the
operation buttons cannot be
used.
Settings are canceled.
No picture/No color.
Screen is stretched or aspect does
not change.
When recorded on a VCR or
passed through an AV selector,
there is disturbance in the
playback picture.
Picture disturbance during
playback or dark.
The 96kHz display doesn’t light
when playing a 96kHz source.
Noticeable difference in DVD and
CD volume.
Remedy
• Clean the disc.
• Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not
match the number on the player, the disc cannot be used (page
8).
• Allow time for any condensation inside the player to evapo-
rate. Avoid using the player near an air-conditioning unit.
• If the disc is loaded upside down, reload the disc with the label
side face up.
• Press 7, then start playback again (3).
• Switch the power off once, then on again using the front panel
STANDBY/ON button.
• When the power is cut due to power failure or by unplugging
the power cord, settings will be canceled.
• Check that connections are correct and that plugs are inserted
fully.
• Check the instruction manual of the TV/monitor to make sure
the TV/monitor settings are incorrect.
• The TV Screen setting is incorrect. Set the TV Screen option to
match the TV/monitor you're using (page 51).
• Due to the player’s copy protection circuits, connection of this
device through a VCR or an AV selector may prevent recording or
cause picture problems. This is not a malfunction.
• This player is compatible with Macro-Vision System copy guard.
Some discs include a copy prevention signal, and when this type
of disc is played back, stripes etc., may appear on some sections
of the picture depending on the TV. This is not a malfunction.
• Discs respond differently to particular player functions. This
may result in the screen becoming black for a brief instant or
shaking slightly when the function is executed. These problems
are largely due to differences between discs and disc content
and are not malfunctions of this player.
• If the 96kHz source is copy-protected the 96kHz display will
not light.
• DVDs and CDs use different recording methods. This is not a
malfunction.
DVD/CD/Video CD player