Filter
Top Products
Additional information12
80
En
• If the transmitter is used near A/V
equipment with an antenna input terminal,
such as a TV, VCR, BS tuner or CS tuner,
you may experience noise interference on a
TV near the transmitter. In such cases,
place the transmitter at a larger distance
from the antenna input terminal of the A/V
equipment.
Scope of operation
Use of this equipment is limited to home use.
(Transmission distances may be reduced
depending on communication environments.)
In the following locations, poor condition or
inability to receive radio waves may cause the
audio to be interrupted or stopped:
• In reinforced concrete buildings or homes
made of metallic structural members.
• Near large metallic furniture.
• In a crowd of people or near a building or
obstacle.
• If you live in a heavily populated residential
area (apartment, townhouse, etc.) and if
your neighbor's microwave is placed near
your system, you may experience radio
wave interference or no sound from the
speaker. If this occurs, move your unit to a
different place. When the microwave is not
in use, there will be no radio wave
interference.
For safety in operation
Do not use the system in the proximity of
electronic equipment that requires high-
accuracy control or handling of very low-level
signals, such as:
• Hearing aids, cardiac pacemakers, other
electrical medical equipment, fire alarms,
automatic doors, and other automated
control equipment.
The system may affect the electronic
equipment, causing malfunction or accident.
• If you use a pacemaker or other electrical
medical equipment, consult the
manufacturer or dealer to check the effects
of radio waves on it.
Do not use the system in places where its use
is prohibited, for example near aircraft
equipment and in hospitals.
The system may affect electronic equipment or
electrical medical equipment, causing an
accident. Follow the instructions given by the
aircraft company or medical institution.
• We do not assume any liability for the
damages incurred due to improper use of
the product by the user or third party,
malfunction during use, other troubles or
use of the product, unless indemnity for
damages is admitted by the law.
Static electricity
Static electricity or other external influence
may cause malfunctioning of this unit. In this
case, unplugging the power cord and then re-
plugging it in will usually reset the unit for
proper operation. If this does not correct the
problem, please consult your nearest Pioneer
service center.
XV-DV9.book 80 ページ ２００４年２月２０日 金曜日 午前１１時４２分