Filter
Top Products
7
Connecting the Display
To connect the display
1 Plug one end of the DVI signal cable to
the DVI port on the display. Tighten the
thumbscrews to secure the connection.
2 Plug the power cord into the power
connector on the connector plate.
3 Plug the other end of the DVI cable
into the video port on the installed
controller. (Use DVI port #1 for
the rst display if you are installing
only one display.)
4 Plug the other end of the power
cord into a grounded outlet.
5 Repeat steps 1 to 4 to
connect a second display
to the controller.
6 Power on your
display rst,
then the
computer.
Use only the cables and power cord
supplied with your display.
Power cord DVI cable
DVI
port 2
DVI
port 1
Connection
for a single
display or
the rst
display of a
dual setup
Controller
installed
DVI cable
020-0458-00A_3.indd 7020-0458-00A_3.indd 7 4/12/06 5:36:40 PM4/12/06 5:36:40 PM