Filter
Top Products
DLP® Projector – User’s Manual
– 9 –
Item Label Description See page:
8.
Up cursor
9.
Right cursor
10.
Down cursor
Navigates and changes settings in the OSD
20
11.
Volume +/- Adjusts volume
19
12.
Mute Mutes the built-in speaker
13.
Zoom+ Zoom in
14.
Zoom- Zoom out
15.
Freeze Freeze/unfreezes the on-screen picture
16.
Blank Makes the screen blank
17.
Source Detects the input device
18.
Auto Auto adjustment for phase, tracking, size, position
19.
Menu Opens the OSD
20
20.
Status Opens the OSD Status menu (the menu only
opens when an input device is detected)
34
21.
Keystone
top/bottom
Corrects image-trapezoid (wider top/bottom) effect
19
22.
Left cursor Navigates and changes settings in the OSD
23.
Enter Changes settings in the OSD
20
24.
Page Up Page up when connected through USB to a PC
25.
Left Left arrow when connected through USB to a PC
26.
Enter Enter key when connected through USB to a PC
27.
Power Turns the projector on or off
14
28.
Laser Use as on-screen pointer. DO NOT POINT IN EYES.
Note:
The remote control can only interface with a computer when connected to the computer through a USB
cable connection. The computer cable connects a computer to the projector for display purposes only.
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or