Filter
Top Products
Connect the audio cable to micro- phone
jack of the RipFlash Trio using the
earphone connector(a) and connect the
other head of audio cable to the earphone
jack of the audio devices.
Press the REC button to start recording.
To pause recording, press the REC/
Pause button. To stop recording, press the
PLAY/STOP button.
If the volume level of your external device is too high, it can cause some noise/distortion. Before
recording, set [MENU]-[SOURCE]-[LINE IN].
Recording quality and timetable (based on 128MB)
LINE- IN
MONO
8 Kbps
16 Kbps
32 Kbps
Max.2180Min
Max.1090Min
Max.540Min
MIC
MONO
8 Kbps
16 Kbps
32 Kbps
Max.2180 Min
Max.1090 Min
Max.540 Min
STEREO
96 Kbps
128 Kbps
160 Kbps
Max.180Min
Max.130Min
Max.100Min
LQ
MQ
HQ
The sound quality is automatically set to MONO when the internal microphone is in use.
the STEREO mode is only applicable with the external microphone or external
audio devices.
When recording from an external sound source, such as an audio devices, select STEREO/HQ
mode for high quality recording soudn.
in this mode the recording time will be reduced.
18
Note
Note