Filter
Top Products
- 19 -
TV Setup
Preparation
1. Connect the unit to the external antenna or CATV connecting cord.
2. Connect to power supply.
3. Turn on the power of the unit.
4. Switch the TV/AV to TV.
5. Press the MENU button to enter the setup menu.
Picture Setup Menu
Press the MENU button once to enter the Picture setup menu, as shown on the below:
The items in the menu are used to adjust the brightness, contrast, and color of the
screen.
Press the button to select the desired item. Then use the or button to adjust the
value.
You can adjust the items in this menu according to the environment around for your
preference.
TV Setup Menu
Press the MENU button twice to enter the TV setup menu, as shown on the below:
In the TV Setup menu, press the button to select item.
1. TV Signal
Press the button to select TV SIGNAL, press the button to select CATV or AIR.
2. Channel
Press the button to select CHANNEL, press the button to select the channel
number.
TV Setup
COLOR 30
CONTRAST 30
BRIGHT 30
PICTURE
TV SIGNAL AIR
CHANNEL 2
FINE 55.25VL
SKIP ON
AUTO SCAN OFF
TV SETUP