Filter
Top Products
Memorizing the Channels
18
Selecting the Tuning Band
This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.
Be sure to select the source before operationNote TV
:.
Before your TV can memorize the available channels, you must specify the type of signal source that is connected
to the unit. (i.e., an antenna or cable system)
Auto Channel Search
Press to display the menu main page.MENU
1
Press repeatedly to select menu.56or Setup
2
Press or to access the submenu.OK 4
3
Press or to select the Tuning Band.OK 4
Air, Cable, Cable HRC, Cable IRC Cable Autoand can be selected.
¨ If using antenna, select Air;
? /
..(,
.)
If using cable, select one of Cable/Cable HRC/Cable IRC Cable Auto according to your local area’s
cable system For further band information contact your
cable service provider
Normally please select Cable Auto
4
Press to select .56or itemTuning Band
5
Navigate to the sub-menu and highlight .Setup Auto Ch Search
1
2
Press or to begin the auto channel search.
The unit will automatically search for all available TV/DTV (if
using antenna), CATV/CADTV (if using cable) program.
OK
4
Manual Channel Set
Navigate to the sub-menu and highlight .Setup Manual Ch Set
1
2
Press or to open sub-menu.OK Manual Channel Set Menu4
After setting channels into memory, you can add or delete channels
from the default channel list as follows:
3
Use navigation buttons ( ) to navigate and select, use
button to add (the added channel will have a mark) or delete
the channel. (If you want to toggle between NTSC and ATSC,
se navigation buttons to highlight it, and then use to toggle
,,
u.)
OK
OK
563 4or
4
Press button to exit.EXIT
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Autoprogram Menu
NTSC Channel 12
Channels Found
Progress (%)
Found
3
7
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
To Move
NTSCTuning Band
31
41
51
33
43
53
37
47
57
39
49
59
32
42
52
36
46
56
34
44
54
Manual Channel Set Menu
To Select
To Exit
OK Exit
40
60
50
38
58
48
35
45
55
Note: EXITif you want to stop the auto-search, press button.
Now when you use CH+/- buttons to cycle among the channels,
the deleted channels can not be selected.
Note:
Manual Channel Set Menu
l
l
For DTV program, you can only delete the programs from the
list, you can not add it.
You can make use of to know
whether an ATSC channel exists as a sub channel.
Use OK button to toggle between
NTSC and ATSC after highlighted.