Connecting your TV
-7-
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied).
Perfect picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The
exact type and location of the aerial will depend on your particular area. Consult your local dealer or service
personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor aerial is not needed.
Connect the equipments as the following figure.
REAR VIEW
Loosen the screw
Insert the feeder in
Tighten the screw
Plug(not supplied)
Adaptor (not supplied)
The signal comes from:
! An outdoor aerial
! An indoor aerial
Connecting the aerial
PC/NB
To VGA
RGB line
You can use your TV as a monitor for connecting through its 15pin standard RGB interface
your PC or NB by . Connect
the devices as shown below.
Connecting the PC or NB
ANT.IN L R S-VHS VIDEO Y PB/CB PR/CR VGA POWER
AUDIO IN
AERIAL SOCKET
ANT.IN
ANT.IN L R S-VHS VIDEO Y PB/CB PR/CR VGA POWER
AUDIO IN
Headphone
NOTE: 1) Headphones are not included in the supplied
accessories.
2) No sound will be heard from the main unit speaks
when a headphone mini-plug is connected into
the headphone jack.
COAXIAL CABLE(75 )
TWIN-LEAD FEEDER(300 )
OR