Filter
Top Products
7
Displays the model number of the monochromator for approximately 5 seconds
and then returns to the utility menu.
Press NXT to get to the remaining functions of this menu.
HOME:
This function is used to initialize the monochromator wavelength and the
motorized slits. When selected, the following menu is presented:
Home slits and Mono:
SID N FRT N FRT X SID X MONO QUIT
The labels for the respective slits will not be shown if that particular motorized slit
is not installed. When one of the slits is selected, that slit is initialized to 10
microns. When MONO is selected, the wavelength of the monochromator is set to
0 nm on grating number 1 unless different initial values have been installed.
Press the key below QUIT to exit the HOME function and select QUIT again to
exit the utility menu.